The camera configuration of the Samsung S10 series new machine has been rumored in the past, especially the differences between the four models are even more diverse. Now, the Korean media thebell has confirmed the number of camera module suppliers and the number of cameras of various models in the latest report, and the disclosure of the three cameras including the Samsung S10 and S10+ will be a dual module design. It is installed separately from the standard/telephoto lens and the wide-angle lens, or it may be a horizontal three-shot model, but the 5G version has only 2 million units.
Three major suppliers provide modules
According to the Korean media thebell report, the suppliers of the rear camera modules of the three new models of the Samsung S10 series have been confirmed, this is SEMCO (Samsung Motors) including Daeduck GDS, NewFlex and returning again. At the same time, the Samsung S10 series will have three models to meet with us, namely the entry model with the 5.8-inch display (codename Beyond 0) and the 6.1-inch S10 (codename Beyond 1) and the 6.4-inch S10 + (codename Beyond2).
However, the three models of the above Samsung S10 series still have significant differences in the number of cameras. Among them, Samsung S10+ will be a five-shot design, providing a combination of front dual camera and rear three camera; Samsung S10 is a front and rear dual camera design, with a combination of front dual camera and rear dual camera As for the entry-level S10 Lite, it will load the rear dual camera and the front single camera. Previously, Samsung insiders have confirmed that the Samsung S10 will adopt a hidden front dual-camera design.
Split three-shot modeling
It is worth noting that the three major suppliers of camera modules for the Samsung S10 series also have their own division of labor. NewFlex will be responsible for the Samsung S10 and S10+ wide-angle lens modules, and the three cameras of these two models are not integrated, but the dual camera + wide-angle module is installed separately, then the two modules are combined, which is The design of the Huawei P20 Pro sounded similar.
Samsung Motors and DaeduckGDS offer dual-camera dual-camera modules for the Samsung S10 and S10+. Although the specific quota is said to be still under negotiation, the Korean industry expects Samsung Motor to be a major supplier, while Daeduck GDS It will be the second supplier. However, the Daeduck GDS will be the primary supplier of the 5.8-inch entry-level rear-mounted dual-camera module.
Or use a 1/2 inch outsole
According to the previous disclosure of GF Securities (Hong Kong) and breaking news @evleaks, the Samsung S10 and S10+ will be equipped with a three-shot combination of 16MP+13MP+12MP, covering the standard, wide-angle and telephoto range, although equipped with CMOS The size of the sensor is currently in a state of secrecy, but there is news that it is possible that the 12MP lens will use the Samsung S5K2L4 sensor with a 1/2-inch outsole.
It is worth noting that the Samsung S10 and S10+ also rumored that the front lens opening is about 3.7mm, and Samsung S Health seems to leak the back camera of the Samsung S10 series in a horizontal arrangement, which may be said to increase battery capacity. design. For the outgoing 5G version with a 6.7-inch display and six shots before and after, the Korean media gave the news that the output will not exceed 2 million.